5204 Cassette Transcriber

Products

	The 5204 cassette transcriber is designed specifically for the replay of taped interviews from the 7000 series range of NEAL interview recorders. Robust in design, the 5204 has been constructed to cope with the rigorous play, stop and rewind process involved in transcribing. A full three motor transport ensures that accuracy and precision is foremost within the transcription procedure therefore safeguarding the evidentiality of the recordings and guaranteeing total impartiality and reliability within a challenging office environment.
			Operating Instructions

Features | Technical Specification | Accessories

Features

Operation is simple - one touch buttons provide wind, forward, play and stop functions.

A backspace control is fitted to give a variable backspace between zero and three seconds when ‘stop' is operated.

The interview and time announcement levels can be varied via the audio slider controls (note that there is sufficient gain available at the maximum position of each level to provide full output volume from an under recorded tape) and an LED indicator now shows interview time elapsed in individual seconds as opposed to bands of 30 seconds.

A three position footswitch is supplied providing start/stop, rewind and wind.

The two replay channels are mixed together to form a single audio output. This can be monitored through the internal loudspeaker or through external headphones.

One or two pairs of headphones can be plugged into the headphone sockets, automatically muting the loudspeaker upon insertion.

Either mono headphones with a 2 contact ¼" jack plug or stereo headphones with a 3 contact ¼" jack plug can be used in the headphone sockets.

Technical Specification

Tape Speed:

4.75 cm/sec

Variable Speed

+50% -25% of nominal

Tape Counter

4 digit LED display reading minutes and seconds

Audio Output

Two replay channels mixed to single audio output

Wow and Flutter:

Better than 0.4% peak DIN weighted

Number of Channels:

2 channel stereo

Frequency Response:

300 Hz to 10KHz ±3dB

Signal to Noise Ratio:

Better than -48 dB (2KHz Ref CCIR Arm)

Internal Loudspeaker

800mW, disabled by inserting headphones plug

Headphone Output:

3V (+12dBm) at 10 ohms source impedance. Two 3 way gauge 'A' 6.3mm jack sockets accepting 2 way or 3 way gauge A jack plug.

Automatic Backspace Control

Variable up to 3 seconds

Power Requirement

Mains 220V/240V AC 50/60Hz 0,1A

Weight

5Kg approx

Dimensions

9½" width x 5½" height x 10" deep (240mm x 140mm x 250mm)

Accessories for use with 5204 transcriber

Three Position Footswitch (code: 29-940)

Lightweight headphones (code: 29-920)

Heavy Duty Headphones (code: 29-921)

Stethoscope Headphones (code: 29-922)

Replacement Stethoscope Earpads - pkt 10 - (code: 29-923)